The vehicle may have customization capabilities that allow you to program certain features to one preferred setting. Customization features can only be programmed to one setting on the vehicle and cannot be programmed to a preferred setting for two different drivers.
All of the customization options may not be available on the vehicle. Only the options available will be displayed on the DIC.
The default settings for the customization features were set when the vehicle left the factory, but may have been changed from their default state since then.
The customization preferences are automatically recalled.
To change customization preferences, use the following procedure.
Entering the Feature Settings Menu
To avoid excessive drain on the battery, it is recommended that the headlamps are turned off.
Feature Settings Menu Items
The following are customization features that allow you to program settings to the vehicle:
DISPLAY IN ENGLISH
This feature will only display if a language other than English has been set. This feature allows you to change the language in which the DIC messages appear to English.
Press until the PRESS
TO
DISPLAY IN ENGLISH screen
appears on the DIC display. Press
once to display all DIC
messages
in English.
DISPLAY LANGUAGE
This feature allows you to select the language in which the DIC messages will appear.
Press until the PRESS
TO
SET DISPLAY LANGUAGE screen
appears on the DIC display. Press
once to access the settings
for
this feature. Then press
to
scroll
through the following settings:
ENGLISH (default): All messages
will appear in English.
FRANCAIS: All messages will appear in French.
ESPANOL: All messages will appear in Spanish.
PORTUGUESE: All messages will appear in Portuguese.
NO CHANGE: No change will be made to this feature. The current setting will remain.
To select a setting, press
while
the desired setting is displayed on
the DIC.
AUTO DOOR LOCK
This feature allows you to select when the vehicle's doors will automatically lock. See Automatic Door Locks on page 2-6.
Press until PRESS
TO SET
AUTO DOOR LOCK appears on the
DIC display. Press
once to
access the settings for this feature.
Then press to scroll through
the
following settings:
SHIFT OUT OF PARK (default):
The doors will automatically lock
when the vehicle is shifted out of
P (Park).
AT VEHICLE SPEED: The doors will automatically lock when the vehicle speed is above 13 km/h (8 mph) for three seconds.
NO CHANGE: No change will be made to this feature. The current setting will remain.
To select a setting, press
while
the desired setting is displayed on
the DIC.
AUTO DOOR UNLOCK
This feature allows you to select whether or not to turn off the automatic door unlocking feature.
It also allows you to select which doors and when the doors will automatically unlock. See Automatic Door Locks on page 2-6.
Press until PRESS
TO SET
AUTO DOOR UNLOCK appears on
the DIC display. Press
once to
access the settings for this feature.
Then press to scroll through
the
following settings:
OFF: None of the doors will
automatically unlock.
DRIVER DOOR AT KEY OUT: Only the driver door will unlock when the key is taken out of the ignition.
DRIVER DOOR IN PARK: Only the driver door will unlock when the vehicle is shifted into P (Park).
ALL DOORS AT KEY OUT: All of the doors will unlock when the key is taken out of the ignition.
ALL DOORS IN PARK (default): All of the doors will unlock when the vehicle is shifted into P (Park).
NO CHANGE: No change will be made to this feature. The current setting will remain.
To select a setting, press
while
the desired setting is displayed on
the DIC.
REMOTE DOOR LOCK
This feature allows you to select the type of feedback you will receive when locking the vehicle with the Remote Keyless Entry (RKE) transmitter. You will not receive feedback when locking the vehicle with the RKE transmitter if the doors are open. See Remote Keyless Entry (RKE) System Operation on page 2-2.
Press until PRESS
TO SET
REMOTE DOOR LOCK appears on
the DIC display. Press
once to
access the settings for this feature.
Then press to scroll through
the
following settings:
VERIFICATION OFF: There will be
no feedback when you press
on
the RKE transmitter.
VERIFICATION LIGHTS ONLY:
The exterior lamps will flash when
you press on the RKE
transmitter.
VERIFICATION HORN ONLY: The
horn will sound on the second press
of on the RKE transmitter.
VERIFICATION HORN & LIGHTS
(default): The exterior lamps will
flash when you press on the RKE
transmitter, and the horn will sound
when
is pressed again within
five seconds of the previous
command.
VERIFICATION NO CHANGE: No change will be made to this feature.
The current setting will remain.
To select a setting, press
while
the desired setting is displayed on
the DIC.
REMOTE DOOR UNLOCK
This feature allows you to select the type of feedback you will receive when unlocking the vehicle with the Remote Keyless Entry (RKE) transmitter. You will not receive feedback when unlocking the vehicle with the RKE transmitter if the doors are open. See Remote Keyless Entry (RKE) System Operation on page 2-2.
Press until PRESS
TO SET
REMOTE DOOR UNLOCK appears
on the DIC display. Press
once
to
access the settings for this feature.
Then press to scroll through
the
following settings:
VERIF LIGHTS OFF: The exterior
lamps will not flash when you press
on the RKE transmitter.
VERIF LIGHTS ON (default): The
exterior lamps will flash when you
press on the RKE transmitter.
VERIF NO CHANGE: No change will be made to this feature. The current setting will remain.
To select a setting, press
while
the desired setting is displayed on
the DIC.
DELAY DOOR LOCK
This feature allows you to select whether or not the locking of the vehicle's doors will be delayed.
When locking the doors with the power door lock switch and a door is open, this feature will delay locking the doors until five seconds after the last door is closed. You will hear three chimes to signal that the delayed locking feature is in use.
The key must be out of the ignition for this feature to work. You can temporarily override delayed locking by pressing the power door lock switch twice or the lock button on the RKE transmitter twice. See Delayed Locking on page 2-6.
Press until PRESS
TO SET
DELAY DOOR LOCK appears on
the DIC display. Press
once to
access the settings for this feature.
Then press to scroll through
the
following settings:
OFF: There will be no delayed
locking of the vehicle's doors.
ON (default): The doors will not lock until five seconds after the last door is closed.
NO CHANGE: No change will be made to this feature. The current setting will remain.
To select a setting, press
while
the desired setting is displayed on
the DIC.
EXIT LIGHTING
This feature allows you to select the amount of time you want the exterior lamps to remain on when it is dark enough outside. This happens after the key is turned from ON/RUN to LOCK/OFF.
Press until PRESS
TO SET
EXIT LIGHTING appears on the DIC
display. Press
once to access
the
settings for this feature. Then press
to scroll through the
following
settings:
OFF: The exterior lamps will not
turn on.
10 SECONDS (default): The exterior lamps will stay on for 10 seconds.
30 SECONDS: The exterior lamps will stay on for 30 seconds.
2 MINUTES: The exterior lamps will stay on for two minutes.
NO CHANGE: No change will be made to this feature. The current setting will remain.
To select a setting, press
while
the desired setting is displayed on
the DIC.
APPROACH LIGHTING
This feature allows you to select whether or not to have the exterior lamps turn on briefly during low light periods after unlocking the vehicle using the Remote Keyless Entry (RKE) transmitter.
Press until PRESS
TO SET
APPROACH LIGHTING appears on
the DIC display. Press
once to
access the settings for this feature.
Then press to scroll through the
following settings:
OFF: The exterior lamps will not
turn on when you unlock the vehicle
with the RKE transmitter.
ON (default): If it is dark enough outside, the exterior lamps will turn on briefly when you unlock the vehicle with the RKE transmitter.
The lamps will remain on for
20 seconds or until on the RKE
transmitter is pressed, or the vehicle
is no longer off. See Remote
Keyless Entry (RKE) System
Operation on page 2-2.
NO CHANGE: No change will be made to this feature. The current setting will remain.
To select a setting, press
while
the desired setting is displayed on
the DIC.
CHIME VOLUME
This feature allows you to select the volume level of the chime.
Press until PRESS
TO SET
CHIME VOLUME appears on the
DIC display. Press
once to
access the settings for this feature.
Then press to scroll through
the
following settings:
NORMAL: The chime volume will
be set to a normal level.
LOUD: The chime volume will be set to a loud level.
NO CHANGE: No change will be made to this feature. The current setting will remain.
There is no default for chime volume. The volume will stay at the last known setting.
To select a setting, press
while
the desired setting is displayed on
the DIC.
REMOTE START
If the vehicle has this feature, it allows you to turn the remote start off or on. The remote start feature allows you to start the engine from outside of the vehicle using the Remote Keyless Entry (RKE) transmitter. See Remote Vehicle Start on page 2-4.
Press until PRESS
TO SET
REMOTE START appears on the
DIC display. Press
once to
access the settings for this feature.
Then press to scroll through
the
following settings:
OFF: The remote start feature will
be disabled.
ON (default): The remote start feature will be enabled.
NO CHANGE: No change will be made to this feature. The current setting will remain.
To select a setting, press while
the desired setting is displayed on
the DIC.
FACTORY SETTINGS
This feature allows you to set all of the customization features back to their factory default settings.
Press until PRESS
TO
RESTORE DEFAULTS appears on
the DIC display. Press
once to
access the settings for this feature.
Then press to scroll through
the
following settings:
RESTORE (default): The
customization features will be set to
their factory default settings.
NO CHANGE: The customization features will not be set to their factory default settings.
To select a setting, press
while
the desired setting is displayed on
the DIC.
EXIT FEATURE SETTINGS
This feature allows you to exit the feature settings menu.
Press until PRESS
TO EXIT
FEATURE SETTINGS appears in
the DIC display. Press
once to
exit the menu.
If you do not exit, pressing
again
will return you to the beginning of
the feature settings menu
Exiting the Feature Settings Menu
The feature settings menu will be exited when any of the following occurs:
Chevrolet Captiva offers a comprehensive vehicle personalization system that allows owners to customize various aspects of their driving experience. From adjusting driver assistance features like parking sensors and automatic headlights to personalizing interior settings such as seat positions, climate control, and audio preferences, the Captiva enables drivers to tailor their vehicle to their exact liking. Exterior customization options also extend to automatic door locks, remote keyless entry, and exterior lighting settings, giving owners full control over their vehicle's behavior and functionality. Overall, the Captiva's vehicle personalization capabilities enhance comfort, convenience, and satisfaction for drivers and passengers alike.
Chevrolet Captiva Service & Repair Manual > Air Conditioning & Heater: Refrigerant Line O-Ring, Replace
Caution: Air conditioning R-134a
liquid refrigerant is capable of harming eyes or freezing skin. Always wear
safety goggles and avoid contact with liquid refrigerant. Failure to follow
these instructions may result in serious personal injury.
Caution: Air conditioning ...